
High Power Design Services Powered by Arrow Swindon CoE
Executive Summary The High-Power Center of Excellence (CoE) of Arrow

Executive Summary The High-Power Center of Excellence (CoE) of Arrow

Executive Summary Powering Precision from Concept to Silicon Designing advanced
Introduction PERC is an abbreviation of programmable electrical rules checking.
Case Study – Elevate your industrial connectivity with cutting-edge semiconductor technology. Discover our Real Time Ethernet Switch supporting major protocols…

ASIC (Application Specific Integrated Circuit) is sometimes very expensive to build. Therefore, it is important to ensure controlled management of the ASIC design and development process. Each phase of the ASIC design and development process should be observed consciously. Precautions must be taken to check that the final ASIC design meets the given requirements and can smoothly work with real-world applications.

White Paper – This paper gives an introduction of logical equivalence check, flow setup, steps to debug it, and solutions to fix LEC…

Case study – How we helped a niche data center infrastructure start-up with the Physical Design of an Innovative Data Center ASIC…

Executive Summary With the exponential increase in the IoT and

End-to-End Design for Testability (DFT) of a Digital Motion Control MEMS ASIC – DFT architecture defining to post-silicon support…

ASIC design and DFT solution for a Gigabit Ethernet Controller at 28nm technology node to enable high-performance …

Memory-intensive blocks with vivid aspect-ratio memory lead to tight challenges in floor planning to placement…

The solution was to engage a partner to provide enhancements, release management and customer support.

Silicon validation is a process of identifying failures resulting from testing during silicon bring-up. During the IC design…

DFT’s main target is to achieve maximum controllability and observability which helps to improve the yield…

As technology shrinks, Yield and Reliability (YAR) are major challenges of SoC (System on Chip)…

Spare cell insertion is a well known technique to reduce the cost of functional fixes, limiting the changes to a few…

The Internet of Things is the network of physical objects that contain embedded technology to communicate…

Soft memories are nothing but memory made up of flip flops. These are very easy to code and very versatile…
Schedule a 30-minute consultation with our Automotive Solution Experts
Schedule a 30-minute consultation with our Battery Management Solutions Expert
Schedule a 30-minute consultation with our Industrial & Energy Solutions Experts
Schedule a 30-minute consultation with our experts


