Industry Application
Application 1
Application 2
Application 3
Related Products
Related Posts
EIC-LCD-1080P
eInfochips EIC-LCD-1080P, is a 5.5” touch screen LCD display that can be used with both eInfochips 410 and eInfochips 820 development kits. This LCD supports 1080 x1920 (FHD) resolution, and operates at 5V voltage supply. It integrates with eInfochips 410/eInfochips 820 over MIPI DSI interface (4 lane) and uses I2C for touch interface configuration.
- Interface Type: MIPI DSI
- LCD Type: IPS TFT-LCD
- Backlight Type: White LED(14*LED)
- Display Resolution: 1080 x 1920 (Maximum)
- Framerate supported: 60
- Bit Per Pixel (BPP): 24
- Pixel stream type: Packed pixel stream, RGB888 (24 bits per pixels)
- Carrier to LCD Cable: 40 – pins FFC Cable
- LCD-Active area – Outline dimensions (W x H): 68.04mm(W) x 120.96mm(H)
- Pixel pitch – 0.063mm x 0.063mm
- Panel Type : Video Mode
- Source output voltage level GVDDP-GND: 2.85 ~ 6V, GVDDN-GND: -2.85 ~ -6V
- System Interfaces
- MIPI DSI 4 data lane
- I2C (8-bits)
- Display Modes: Power saving mode (standby / deep standby)
- Operating Temperature: 70° C ± 2° C; -20° C ± 2° C
- Ambient Temperature: 80° C ± 2° C; -30° C ± 2° C
- Built–in OTP (4 Times) to store VCOM/GVDD calibration and ID1~ID3
- Built–in OTP (1 Times) to store gamma, panel timing, and analog power setting
- Built-in internal oscillator and hardware reset
Note :
“Specifications are subject to change without notice. Not all features listed may be supported in software. All brand or product names are trademarks or registered trademarks of their respective owners. Qualcomm Snapdragon, Qualcomm Kryo, Qualcomm Spectra, Qualcomm Adreno, and Qualcomm Hexagon are products of Qualcomm Technologies, Inc.”
