_banner

Redesign of Power Meter

Executive Summary

The client is a pioneering technology leader that works closely with utilities, industry, transportation, and infrastructure customers to enable solutions for industrial digitalization. The client had multiple power meter variants based on the ST Microelectronics STM32F4 controller that was nearing end-of-life. The client wanted to re-engineer the existing power meter design to extend the product lifecycle with an additional feature set and make it durable and cost-efficient at the same time. eInfochips took complete responsibility for the product re-design and development. Leveraging access to the product roadmap and the Arrow supply chain, eInfochips proposed a solution that extended the life cycle by five years.

Project Highlights

  • PCB layout and Gerber generation, Design For Manufacturability (DFM), and Design For Testability (DFT) implementation
  • Major Component Selection, BOM Analysis considering existing STM32F4-based BOM
  • Board bring-up, Application Migration
  • Firmware Upgrade and Bootloader porting
  • Port BLE firmware to new SDK
  • Library/Stack upgrade: STemWin, BACnet, Profibus, Xcrypto, embOS/IP (embNet), embOS.

To read more, download the copy arrows-new

To download this resource

Fill in the details below





    I have read and understand the Privacy Policy By submitting this form, I acknowledge that I have read and understand the Privacy Policy

    I wish to be contacted by eInfochips I wish to be contacted by eInfochips

    For all career related inquiries, kindly visit our careers page or write to career@einfochips.com

    Executive Summary

    The client is a pioneering technology leader that works closely with utilities, industry, transportation, and infrastructure customers to enable solutions for industrial digitalization. The client had multiple power meter variants based on the ST Microelectronics STM32F4 controller that was nearing end-of-life. The client wanted to re-engineer the existing power meter design to extend the product lifecycle with an additional feature set and make it durable and cost-efficient at the same time. eInfochips took complete responsibility for the product re-design and development. Leveraging access to the product roadmap and the Arrow supply chain, eInfochips proposed a solution that extended the life cycle by five years.

    Project Highlights

    • PCB layout and Gerber generation, Design For Manufacturability (DFM), and Design For Testability (DFT) implementation
    • Major Component Selection, BOM Analysis considering existing STM32F4-based BOM
    • Board bring-up, Application Migration
    • Firmware Upgrade and Bootloader porting
    • Port BLE firmware to new SDK
    • Library/Stack upgrade: STemWin, BACnet, Profibus, Xcrypto, embOS/IP (embNet), embOS.

    To read more, download the copy

    arrows-new-1

    To download this resource

    Fill in the details below





      I have read and understand the Privacy Policy By submitting this form, I acknowledge that I have read and understand the Privacy Policy

      I wish to be contacted by eInfochips I wish to be contacted by eInfochips

      For all career related inquiries, kindly visit our careers page or write to career@einfochips.com

      Executive Summary

      The client is a pioneering technology leader that works closely with utilities, industry, transportation, and infrastructure customers to enable solutions for industrial digitalization. The client had multiple power meter variants based on the ST Microelectronics STM32F4 controller that was nearing end-of-life. The client wanted to re-engineer the existing power meter design to extend the product lifecycle with an additional feature set and make it durable and cost-efficient at the same time. eInfochips took complete responsibility for the product re-design and development. Leveraging access to the product roadmap and the Arrow supply chain, eInfochips proposed a solution that extended the life cycle by five years.

      Project Highlights

      • PCB layout and Gerber generation, Design For Manufacturability (DFM), and Design For Testability (DFT) implementation
      • Major Component Selection, BOM Analysis considering existing STM32F4-based BOM
      • Board bring-up, Application Migration
      • Firmware Upgrade and Bootloader porting
      • Port BLE firmware to new SDK
      • Library/Stack upgrade: STemWin, BACnet, Profibus, Xcrypto, embOS/IP (embNet), embOS.

      To read more, download the copy

      arrows-new-1

      To download this resource

      Fill in the details below





        I have read and understand the Privacy Policy By submitting this form, I acknowledge that I have read and understand the Privacy Policy

        I wish to be contacted by eInfochips I wish to be contacted by eInfochips

        For all career related inquiries, kindly visit our careers page or write to career@einfochips.com

        Recent Posts
        https://nc.dltp2.tanahlautkab.go.id/