|
eInfochips Strengthens RTL-to-GDSII Design Service Capabilities,
Adopts Magma IC Implementation Flow
BANGALORE, India, Nov. 21, 2005 -- Magma® Design Automation
Inc. (Nasdaq: LAVA), a provider of semiconductor design software
today announced that eInfochips, Inc., a leading chip and product
design services firm with spec-to-silicon-to-system capabilities,
has strengthened its integrated circuit (IC) design and verification
capabilities. The company has adopted Magma's Blast Create™, Blast
Fusion®, Blast Power™, Blast Rail™ and Blast Noise® implementation
software and has added expert designers to its staff. With advanced
electronic design automation software, proven methodologies and
skilled engineers, eInfochips can offer comprehensive, RTL-to-GDSII
design and verification of systems on chip (SoCs) for the computing,
consumer electronics and communications markets.
"To meet the performance, turnaround time and budget requirements
of our worldwide semiconductor customers, eInfochips uses the most
advanced technology," said Tapan Joshi, eInfochips' vice president
of marketing. "We selected the Magma software as the foundation
of our design services expansion because it provides critical capabilities
for sub-nanometer design. Integrating logic and physical design
into a single environment ensures a smooth ASIC hand-off. The Magma
system's ability to concurrently address timing, power, area, signal
integrity and yield, allows us to identify and correct problems
early in the flow, accurately predict design results and shorten
design cycles."
"eInfochips has an impressive track record, having completed over
80 chip design and verification projects for large semiconductor
and fabless chip companies," said Atreya Nagaraja, director of India
& ASEAN sales of Magma Design Automation. "With the right combination
of technical capabilities and market expertise, we are pleased to
add them to the list of design centers that can support our growing
customer base in India."
About Magma's RTL-to-GDSII Solutions
Blast Create, Blast Fusion, Blast Noise, Blast Power and Blast
Rail are key components of Magma's integrated RTL-to-GDSII design
flow. Blast Create is a predictable RTL-to-placed-gates solution
that enables designers to determine whether their design will meet
timing prior to handing it off to layout. Blast Fusion is a fast
physical design system for advanced methodologies and nanometer
process technologies. It provides advanced analysis and optimization
capabilities for designing high-performance, low-power designs.
Blast Fusion enables rapid design closure, taking into account new
nanometer design challenges such as on-chip variation. Blast Noise
is Magma's complete integrated signal integrity analysis and prevention
solution. Blast Noise works concurrently with Blast Fusion throughout
the implementation flow to automatically analyze and adjust a chip
design to avoid crosstalk noise, crosstalk delay and signal electromigration
(EM) problems. By automatically addressing these problems during
physical design, Blast Noise eliminates the need for cumbersome
post-layout analysis and repair, and ensures working silicon. Blast
Rail and Blast Power provide power analysis, management and optimization
capabilities, enabling continuous power, timing and area tradeoffs
throughout the design flow.
About eInfochips
eInfochips Inc., based in Santa Clara, is a leading provider of
cutting edge ASIC design and verification services, Embedded systems
solutions and IP cores. Their capabilities extend from Specification
to System, with knowledge on ASIC design & verification, physical
design, board design and embedded firmware development. The company's
India and US design centers have delivered SoC and Embedded solutions
to a variety of customers thus increasing their cost-effectiveness,
reducing their time-to-market and growing their market strength.
A partial list of customers includes ATI, Rambus, Texas Instruments,
Cisco, Cypress Semiconductors, Sun Microsystems, Philips, Broadcom,
AMCC. Website www.einfochips.com
About Magma
Magma is a leading provider of software for semiconductor design.
The world's top chip companies use Magma's EDA products to design
and verify complex, high-performance integrated circuits (ICs) for
communications, computing, consumer electronics and networking applications,
while at the same time reducing design time and costs. Magma provides
software for IC implementation, analysis, physical verification,
characterization and programmable logic design, and the company's
integrated RTL-to-GDSII design flow offers "The Fastest Path from
RTL to Silicon". Magma is headquartered in Santa Clara, Calif.
with offices around the world. The company's stock trades on Nasdaq
under the ticker symbol LAVA. Visit Magma Design Automation on the
Web at www.magma-da.com.
###
Blast Fusion, Blast Noise and Magma and are registered
trademarks, and Blast Create, Blast Power, Blast Rail and "The Fastest
Path from RTL to Silicon" are trademarks of Magma Design Automation
Inc. All other product and company names are trademarks or registered
trademarks of their respective companies.
FORWARD-LOOKING STATEMENTS:
Except for the historical information contained herein, the matters
set forth in this press release, including statements about the
performance of Magma software and eInfochips' ability to offer RTL-to-GDSII
design and verification of SoCs are forward-looking statements within
the meaning of the "safe harbor" provisions of the Private Securities
Litigation Reform Act of 1995.These forward-looking statements are
subject to risks and uncertainties that could cause actual results
to differ materially including, but not limited to Magma's ability
to keep pace with rapidly changing technology; its products' abilities
to produce desired results; and eInfochips' designers' abilities
to produce desired results. Further discussion of these and other
potential risk factors may be found in Magma's public filings with
the Securities and Exchange Commission (www.sec.gov). Magma undertakes
no additional obligation to update these forward-looking statements.
Contact:
Magma Design Automation Inc.
Monica Marmie
Director, Marketing Communications
408-565-7689
monical@magma-da.com
|
|
|