MPC830x KIT: MPC830x Processor Evaluation Kit
The MPC830X System on Module (SOM) board is optimal cost reference development board for Freescale's MPC830X processor. This board provides flexibility to interface other peripherals on board by using carrier card.
This MPC830XSOM can be used to customize BSP as per project and take ready to use software for product development. The module is made available with the tools, device drivers, and additional features needed for embedded Linux project.
Applications
- Network communication
- Low-End Printer CPU
- Smart Energy Metering Gateway
- IEEE Std 1588™ in Test and Measurement equipment and Industrial Automation
- IEEE Std 802.11n™ WLAN Access Point
- Residential Gateway
- Managed Industrial Router
|
Kit Content
MPC830x Reference Design Kit Contents
The MPC830x evaluation kit includes the following items:
- MPC830x SOM board
- MPC830x carrier card
- Two UART cables
- Board support package
- Ethernet cable
- Two power adaptors (12V–5A) and cable
|
To Buy: Please eMail us on
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
MPC830x Kit Features
|
MPC8306-KIT |
MPC8309-KIT |
| CPU |
MPC8306 PowerQUICC II Pro |
MPC8309 PowerQUICC II Pro |
| CPU Frequency |
133/266 MHz |
266/333 MHz |
| Memory Subsystem |
- 128 MB DDR2 SDRAM
- 8 MB NOR flash memory
- 512 MB NAND flash memory
- 256 KB serial EEPROM
|
- 256 MB DDR2 SDRAM
- 8 MB NOR flash memory
- 512 MB NAND flash memory
- 256 KB serial EEPROM
|
| Ethernet |
1 x 10/100 MII/RMII, 2 x 10/100 MII |
3 x 10/100 MII/RMII |
| USB 2.0 |
1 |
1 |
| eSDHC |
1 (microSD) |
1 (microSD) |
| UART |
2 |
2 |
| I2C |
2 |
2 |
| FlexCAN |
1 |
1 |
| Connectors—SOM |
- 3-pin power jack
- 3-pin UART header for console
- JTAG/COP for debug
- 120-pin and 140-pin board-to-board connector
- 6-pin BDM header for KA2 programming
- RJ-45 for Ethernet
- microSD card
- 6-pin header for boot device (NAND/NOR) selection
|
- 3-pin power jack
- 3-pin UART header for console
- JTAG/COP for debug
- 120-pin and 140-pin board-to-board connector
- 6-pin BDM header for KA2 programming
- RJ-45 for Ethernet
- microSD card
- 6-pin header for boot device (NAND/NOR) selection
|
| Connectors—Carrier Board |
- Dual stack DB9 connector for RS-232 console and RS-485
- RJ45 connector for T1/E1
- RJ45 connector for FEC-3
- MiniAB USB
- Microcontroller UART header
- Microcontroller BDM header
- 4-pin CAN header
- RJ-11 for SLIC/PSTN phone interface
- 60-pin local bus
- 120-pin and 140-pin board-to-board connector
- 16-pin SPI and IEEE® 1588 header
- 16-pin GPIO header
|
- PCI card edge connector
- Mini PCI card edge connector
- Dual stack DB9 connector for RS-232 console and RS-485
- RJ45 connector for T1/E1
- RJ45 connector for FEC-3
- MiniAB USB
- Microcontroller UART header
- Microcontroller BDM header
- 4-pin CAN header
- RJ-11 for SLIC/PSTN phone interface
- 60-pin local bus
- 120-pin and 140-pin board-to-board connector
- 16-pin SPI and IEEE 1588 header
- 16-pin GPIO header
|
| Form Factor—SOM |
90 mm x 70 mm |
90 mm x 70 mm |
| Form Factor—Carrier Board |
170 mm x 170 mm |
170 mm x 170 mm |
| Certification |
FCC Class A, CE |
FCC Class A, CE |
| RoHS |
Yes |
Yes |
